How Do I Know That I Need My Limestone to Be Repaired?

Limestone flooring is beautiful, but only when it is well taken care of and in good condition. While it is a very durable material, limestone will inevitably encounter issues if you aren’t careful. It may even need repairs, and when your limestone needs to be repaired or starts to have issues, it begins to look more worn out and less attractive. 

When it comes to caring for your limestone, there are a few things to keep an eye out for. Common repair issues can be easy to spot if you know what you’re looking for. If you spot them early enough, you can get them fixed before they become a bigger issue.

Find out more about our Orlando limestone restoration services

Signs My Limestone Needs To Be Repaired

Obvious Wear and Tear

Due to weather and water exposure, your limestone may show signs of routine wear and tear. Most often, limestone experiencing wear and tear, look dull, or may have excessive erosion in high-traffic areas. If your limestone is exposed to the weather, it may also look bleached or have divots where rainwater runs over it regularly.

Chips and Marks

Limestone is a strong flooring material, but it can be chipped, scratched, and scraped if you aren’t careful. If you notice any chips or marks, then it’s a pretty good sign that your limestone needs to be repaired. You’ll likely also see signs of regular wear and tear.

Most chips and marks aren’t a safety issue, but large chips can be. If the chip is small enough, it may go unnoticed by everyone but you, making it merely a cosmetic issue. If the chip is a tripping hazard, it should be taken care of immediately to ensure that your limestone is safe to walk on.

Worn Down Areas

In high-traffic areas, your limestone will begin to wear down or erode. You may notice a pathway is starting to be cut out in the stone or the water runoff route is glaringly obvious. Whatever the case, any part of your limestone flooring that receives regular, unrelenting traffic will begin to wear down and show.


Anything can stain your limestone: spilled juice, dirt, oil, or grease. Whether your limestone is indoors or outdoors, it can be stained. In some cases, you may not notice the stain until it’s already deep in your limestone and unlikely to come out. Fortunately, our professional repair services can fix this for you and bring your limestone back to life.


Crumbling usually occurs along grout lines and edges or near chips. While limestone is strong, it can crumble easily when there’s a weak spot or your flooring hasn’t been properly sealed. What may start as a relatively minor issue can quickly grow out of hand, resulting in entire areas of your limestone needing to be replaced.

Crumbling limestone isn’t an easy fix, but when done professionally, it can be done without hurting nearby stones. While you will most likely need to replace the crumbling stone, doing so will ensure that the problem doesn’t grow worse and weaken other parts of your flooring. The last thing you need is large portions of your flooring to crumble underneath you.

Long Time Between Maintenance

If it’s been a while since you last had a maintenance visit for your limestone, or you can’t remember the last time it was cleaned, it’s time to bring a professional out to repair it. Limestone needs regular cleaning and maintenance, or it will start to wear out quicker and need more care.


To keep your limestone looking attractive and like new, it’s important to schedule regular repairs and only entrust the work to a professional. While it may be tempting to do so on your own, you may end up harming your limestone. Instead, contact our experienced team so that your limestone flooring gets the best care possible.